Substance profile
Bromadiolone
Bromadiolone is a white to off-white powder and is odorless.
01 · Identification
What Bromadiolone is
Bromadiolone is a white to off-white powder and is odorless. It melts at 199 °C, is soluble in water.
Under the GHS it carries the signal word Danger.
Other names for Bromadiolone
- bromadiolone (ISO)
- 3-[3-(4′-bromobiphenyl-4-yl)-3-hydroxy-1-phenylpropyl]-4-hydroxy-2H-chromen-2-one
02 · GHS classification
Hazards and label elements
Harmonised classification under CLP Annex VI. This is the legally binding classification in the EU; other jurisdictions may differ.
| Code | Hazard statement |
|---|---|
| H360D | May damage the unborn child. |
| H330 | Fatal if inhaled. |
| H310 | Fatal in contact with skin. |
| H300 | Fatal if swallowed. |
| H372 | Causes damage to organs <or state all organs affected, if known> through prolonged or repeated exposure <state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard>. |
| H400 | Very toxic to aquatic life. |
| H410 | Very toxic to aquatic life with long lasting effects. |
Precautionary statements: P260, P270, P271, P273, P280, P301, P302, P304, P310, P314, P330, P352, P391, P501
This page lists only the codes assigned to Bromadiolone. The full reference lives on the hazard statements hub, the precautionary statements hub and the GHS pictograms hub.
03 · Physical and chemical properties
Bromadiolone properties
Every value is shown with the conditions it was measured under and the source it came from. Where sources disagree, all values are listed rather than one being picked — the difference is usually a different form of the substance, not an error.
| Property | Value | Conditions | Source |
|---|---|---|---|
| Boiling point | Decomposes, without boiling, above the melting point | decomposes | HSDB |
| Melting point | 199.05 °C (390.3 °F) | range, midpoint shown | HSDB |
| 205 °C (401 °F) | range, midpoint shown | CAMEO | |
| Density | 1.45 g/cm³ | at 20.5 °C | HSDB |
| Solubility | Soluble in dimethylsulfoxide | HSDB | |
| Solubility at 20-25 °C (g/L): dimethylformamide 730.0; ethyl acetate 25.0; acetone 22.3; chloroform 10.1; ethanol 8.2; methanol 5.6; ethyl ether 3.7; hexane 0.2 | HSDB | ||
| In water, >1.14X10+4 at pH 5, 2.48X10-3 at pH 7, 0.180 at pH 9 (all in g/L at 20 °C) | at 20 °C | HSDB | |
| Vapor pressure | 1.598e-10 mmHg | at 25 °C | HSDB |
| 3.75e-7 mmHg | at 45 °C | HSDB | |
| 2e-8 mmHg | Haz-Map | ||
| Flash point | 218 °C (424.4 °F) | HSDB | |
| Corrosivity | Non-corrosive | HSDB |
Values compiled from PubChem Laboratory Chemical Safety Summary. Temperatures converted to Fahrenheit for reference.
04 · Handling and storage
Storing and handling Bromadiolone
Storage conditions
Keep container tightly closed in a dry and well-ventilated place.
Source: Hazardous Substances Data Bank (HSDB)
Planning storage for a mix of chemicals? Check Bromadiolone in the storage compatibility matrix →
Safety Data Sheet
Getting an SDS for Bromadiolone
A Safety Data Sheet is written for a product, not for a substance: the supplier of the grade you actually buy issues it, so two suppliers of Bromadiolone issue two different sheets. That is why there is no single authoritative SDS for a substance to download — what there is, is the job of collecting the sheets for the products you hold and keeping them current as suppliers revise them.
Nearby
Substances next to Bromadiolone
Keep going: substances starting with B, or search the whole database by name, CAS number, pictogram or signal word.