Provenance

Reference data from EU CLP Annex VI and published regulations — verify against your supplier's SDS before use.

Build a label

Substance profile

Schradan

Schradan is a viscous liquid.

CAS 152-16-9 C8H24N4O3P2 286.25 g/mol Danger

01 · Identification

What Schradan is

Schradan is a viscous liquid. Its molecular formula is C8H24N4O3P2 and its molecular weight is 286.25 g/mol. It melts at 17 °C.

Under the GHS it carries the signal word Danger.

CAS number152-16-9
EC number205-801-0
Index number015-026-00-8
Molecular formulaC8H24N4O3P2
Molecular weight286.25 g/mol

Other names for Schradan

  • schradan (ISO)
  • octamethylpyrophosphoramide

02 · GHS classification

Hazards and label elements

Harmonised classification under CLP Annex VI. This is the legally binding classification in the EU; other jurisdictions may differ.

Signal wordDanger
Hazard statements assigned to Schradan
CodeHazard statement
H310 Fatal in contact with skin.
H300 Fatal if swallowed.

Precautionary statements: P270, P280, P301, P302, P310, P330, P352

03 · Physical and chemical properties

Schradan properties

Every value is shown with the conditions it was measured under and the source it came from. Where sources disagree, all values are listed rather than one being picked — the difference is usually a different form of the substance, not an error.

Property Value Conditions Source
Boiling point 122.5 °C (252.5 °F) range, midpoint shown, at 0.5 mmHg (reduced pressure) HSDB
Melting point 17 °C (62.6 °F) HSDB
16.94 °C (62.5 °F) range, midpoint shown CAMEO
Density 1.1343 g/cm³ at 25 °C HSDB
1.09 g/cm³ at 25 °C CAMEO
Solubility SOL IN CHLOROFORM HSDB
SOL IN KETONES, NITRILES, ESTERS, ALCOHOLS, AROMATIC HYDROCARBONS; MISCIBLE WITH WATER; PRACTICALLY INSOL IN HIGHER ALIPHATIC HYDROCARBONS HSDB
SOL IN ACETONE, BENZENE HSDB
Vapor pressure 0.001 mmHg at 25 °C HSDB

Values compiled from PubChem Laboratory Chemical Safety Summary. Temperatures converted to Fahrenheit for reference.

04 · Handling and storage

Storing and handling Schradan

Storage conditions

Rooms used for storage only should be soundly constructed & fitted with secure locks. Floors should be kept clear & pesticides clearly identified. If repacking is carried out in storage rooms, adequate light should be available; floors should be impervious & sound ... . /Pesticides/

Source: Hazardous Substances Data Bank (HSDB)

Reactivity

Organophosphates, such as DIPHOSPHORAMIDE, OCTAMETHYL-, are susceptible to formation of highly toxic and flammable phosphine gas in the presence of strong reducing agents such as hydrides. Partial oxidation by oxidizing agents may result in the release of toxic phosphorus oxides.

Source: CAMEO Chemicals

Planning storage for a mix of chemicals? Check Schradan in the storage compatibility matrix →

Get the free GHS / CLP / OSHA deadline calendar

Verified 2026–2029 compliance dates in one PDF — plus alerts when the rules change.