Provenance

Reference data from EU CLP Annex VI and published regulations — verify against your supplier's SDS before use.

Build a label

Substance profile

Phenyl glycidyl ether

Phenyl glycidyl ether is a colorless liquid (Note: A solid below 38 degrees F).

CAS 122-60-1 C9H10O2 150.17 g/mol Danger

01 · Identification

What Phenyl glycidyl ether is

Phenyl glycidyl ether is a colorless liquid (Note: A solid below 38 degrees F). Its molecular formula is C9H10O2 and its molecular weight is 150.17 g/mol. It boils at 245 °C, melts at 3.5 °C.

Under the GHS it carries the signal word Danger. It is classed as carcinogens.

CAS number122-60-1
EC number204-557-2
Index number603-067-00-X
Molecular formulaC9H10O2
Molecular weight150.17 g/mol
Chemical class Carcinogens

Other names for Phenyl glycidyl ether

  • 2,3-epoxypropyl phenyl ether
  • 1,2-epoxy-3-phenoxypropane

02 · GHS classification

Hazards and label elements

Harmonised classification under CLP Annex VI. This is the legally binding classification in the EU; other jurisdictions may differ.

Signal wordDanger
Hazard statements assigned to Phenyl glycidyl ether
CodeHazard statement
H350 May cause cancer <state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard>.
H341 Suspected of causing genetic defects <state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard>.
H332 Harmful if inhaled.
H335 May cause respiratory irritation.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H412 Harmful to aquatic life with long lasting effects.

Precautionary statements: P201, P260, P261, P264, P271, P272, P273, P280, P302, P304, P308, P312, P313, P332, P333, P352, P501

This page lists only the codes assigned to Phenyl glycidyl ether. The full reference lives on the hazard statements hub, the precautionary statements hub and the GHS pictograms hub.

03 · Physical and chemical properties

Phenyl glycidyl ether properties

Every value is shown with the conditions it was measured under and the source it came from. Where sources disagree, all values are listed rather than one being picked — the difference is usually a different form of the substance, not an error.

Property Value Conditions Source
Boiling point 245 °C (473 °F) HSDB
245 °C (473 °F) at 760 mmHg CAMEO
Melting point 3.5 °C (38.3 °F) HSDB
3.33 °C (38 °F) NIOSH
Density 1.11 g/cm³ NIOSH
1.1109 g/cm³ at 21 °C HSDB
1.1092 g/cm³ at 20 °C CAMEO
Solubility 12.9% in octane; completely sol in acetone and toluene HSDB
0.2% NIOSH
In water, 2,400 mg/L at 25 °C at 25 °C HSDB
Vapor pressure 0.01 mmHg NIOSH
0.01 mmHg at 20 °C CAMEO
0.01 mmHg at 25 °C HSDB
Flash point 120 °C (248 °F) HSDB
114 °C (237.2 °F) ICSC
Lower explosive limit (LEL) Combustible HSDB
The substance can presumably form explosive peroxides. HSDB
Class IIIB Combustible Liquid: Fl.P. at or above 200 °F. NIOSH
Vapor density 4.37 (air = 1) HSDB

Values compiled from PubChem Laboratory Chemical Safety Summary. Temperatures converted to Fahrenheit for reference.

04 · Handling and storage

Storing and handling Phenyl glycidyl ether

Storage conditions

Store in an area without drain or sewer access. Seperated from strong oxidants, strong bases, strong acids and amines. Cool. Keep in the dark.

Source: Hazardous Substances Data Bank (HSDB)

Incompatible materials

Incompatibilities: Contact with strong oxidizing agents may cause fires and explosions. Contact with amines, strong acids, and strong bases may cause polymerization with the liberation of heat and spattering. Exposure to light and air may result in the formation of explosive peroxides.

Source: Hazardous Substances Data Bank (HSDB)

Reactivity

PHENYL GLYCIDYL ETHER, an ether, can act as a base. They form salts with strong acids and addition complexes with Lewis acids. The complex between diethyl ether and boron trifluoride is an example. Ethers may react violently with strong oxidizing agents. In other reactions, which typically involve the breaking of the carbon-oxygen bond, ethers are relatively inert.

Source: CAMEO Chemicals

Planning storage for a mix of chemicals? Check Phenyl glycidyl ether in the storage compatibility matrix →

Safety Data Sheet

Getting an SDS for Phenyl glycidyl ether

A Safety Data Sheet is written for a product, not for a substance: the supplier of the grade you actually buy issues it, so two suppliers of Phenyl glycidyl ether issue two different sheets. That is why there is no single authoritative SDS for a substance to download — what there is, is the job of collecting the sheets for the products you hold and keeping them current as suppliers revise them.

Nearby

Substances next to Phenyl glycidyl ether

Keep going: substances starting with P, or search the whole database by name, CAS number, pictogram or signal word.

Get the free GHS / CLP / OSHA deadline calendar

Verified 2026–2029 compliance dates in one PDF — plus alerts when the rules change.