Provenance

Reference data from EU CLP Annex VI and published regulations — verify against your supplier's SDS before use.

Build a label

Substance profile

Demeton

Demeton is an amber, oily liquid with a technical grade demeton has a pronounced mercaptan-like odor.

CAS 8065-48-3 Danger

01 · Identification

What Demeton is

Demeton is an amber, oily liquid with a technical grade demeton has a pronounced mercaptan-like odor. It melts at -25 °C.

Under the GHS it carries the signal word Danger.

CAS number8065-48-3
Index number015-118-00-8

02 · GHS classification

Hazards and label elements

Harmonised classification under CLP Annex VI. This is the legally binding classification in the EU; other jurisdictions may differ.

Signal wordDanger
Hazard statements assigned to Demeton
CodeHazard statement
H310 Fatal in contact with skin.
H300 Fatal if swallowed.
H400 Very toxic to aquatic life.

Precautionary statements: P270, P273, P280, P301, P302, P310, P330, P352, P391, P501

03 · Physical and chemical properties

Demeton properties

Every value is shown with the conditions it was measured under and the source it came from. Where sources disagree, all values are listed rather than one being picked — the difference is usually a different form of the substance, not an error.

Property Value Conditions Source
Boiling point 134 °C (273.2 °F) at 2 mmHg (reduced pressure) HSDB
133.89 °C (273 °F) at 2 mmHg (reduced pressure) CAMEO
134 °C (273.2 °F) at 2.02517 mmHg (reduced pressure) ICSC
Melting point -25 °C (-13 °F) CAMEO
-25 °C (-13 °F) below this value NIOSH
Density 1.12 g/cm³ NIOSH
1.183 g/cm³ CAMEO
1.1183 g/cm³ at 20 °C HSDB
Solubility Sol in propylene glycol, ethanol, toluene and similar hydrocarbons HSDB
0.01% NIOSH
In water, 6.66X10+2 mg/L at 25 °C at 25 °C HSDB
Vapor pressure 0.0003 mmHg NIOSH
0.00026 mmHg CAMEO
0.00034 mmHg at 20 °C HSDB
Flash point 45 °C (113 °F) HSDB
Autoignition temperature 463.89 °C (867 °F) HSDB
464 °C (867.2 °F) ICSC
Lower explosive limit (LEL) 1 % by volume CAMEO
1.0%-5.3% HSDB
Upper explosive limit (UEL) 5.3 % by volume CAMEO
Vapor density Heavier than air (EPA, 1998) (Relative to Air) CAMEO
heavier than air OSHA
Corrosivity Noncorrosive HSDB

Values compiled from PubChem Laboratory Chemical Safety Summary. Temperatures converted to Fahrenheit for reference.

04 · Handling and storage

Storing and handling Demeton

Incompatible materials

Strong oxidizers, alkalis, water.

Source: Hazardous Substances Data Bank (HSDB)

Reactivity

DEMETON may release sulfur oxides and phosphoric acid. Solvent carrier vapors may travel on ground to ignition source. Avoid strong oxidizers. Avoid mixtures with water or polar solvents, in which sulfur is lost to oxygen, air and light, which cause hydrolysis, alkaline mixtures and oxidizing agents. [EPA, 1998].

Source: CAMEO Chemicals

Planning storage for a mix of chemicals? Check Demeton in the storage compatibility matrix →

Get the free GHS / CLP / OSHA deadline calendar

Verified 2026–2029 compliance dates in one PDF — plus alerts when the rules change.