Provenance

Reference data from EU CLP Annex VI and published regulations — verify against your supplier's SDS before use.

Build a label

Substance profile

Allyl methacrylate

Allyl methacrylate is a colorless liquid.

CAS 96-05-9 C7H10O2 126.15 g/mol Danger

01 · Identification

What Allyl methacrylate is

Allyl methacrylate is a colorless liquid. Its molecular formula is C7H10O2 and its molecular weight is 126.15 g/mol. It boils at 150 °C.

Under the GHS it carries the signal word Danger.

CAS number96-05-9
EC number202-473-0
Index number607-246-00-3
Molecular formulaC7H10O2
Molecular weight126.15 g/mol

Other names for Allyl methacrylate

  • 2-methyl-2-propenoic acid 2-propenyl ester

02 · GHS classification

Hazards and label elements

Harmonised classification under CLP Annex VI. This is the legally binding classification in the EU; other jurisdictions may differ.

Signal wordDanger
Hazard statements assigned to Allyl methacrylate
CodeHazard statement
H226 Flammable liquid and vapour.
H330 Fatal if inhaled.
H311 Toxic in contact with skin.
H302 Harmful if swallowed.
H400 Very toxic to aquatic life.

Precautionary statements: P210, P233, P241, P242, P260, P270, P271, P273, P280, P301, P302, P304, P310, P312, P330, P352, P391, P403, P501

03 · Physical and chemical properties

Allyl methacrylate properties

Every value is shown with the conditions it was measured under and the source it came from. Where sources disagree, all values are listed rather than one being picked — the difference is usually a different form of the substance, not an error.

Property Value Conditions Source
Boiling point 150 °C (302 °F) HSDB
Density 0.9335 g/cm³ OSHA
0.9335 g/cm³ at 20 °C HSDB
Vapor pressure 5.77 mmHg OSHA
5.77 mmHg at 25 °C HSDB
Flash point 33.9 °C (93 °F) Haz-Map

Values compiled from PubChem Laboratory Chemical Safety Summary. Temperatures converted to Fahrenheit for reference.

04 · Handling and storage

Storing and handling Allyl methacrylate

Storage conditions

Temp during storage must be kept low to minimize formation of peroxides and other oxidation products. ... Storage temp below 30 °C are recommended for the polyfunctional methacrylates. ... The methacrylate monomers should not be stored for longer than one year. Shorter storage times are recommended for the aminomethacrylates, ie, three months, and the polyfunctional methacrylates, ie, six months. Many of these cmpd are sensitive to UV light and should, therefore, be stored in the dark. The methacryclic esters may be stored in mild steel, stainless steel, or aluminum. /Methiacrylic acid & derivatives/

Source: Hazardous Substances Data Bank (HSDB)

Planning storage for a mix of chemicals? Check Allyl methacrylate in the storage compatibility matrix →

Get the free GHS / CLP / OSHA deadline calendar

Verified 2026–2029 compliance dates in one PDF — plus alerts when the rules change.