Reference data from EU CLP Annex VI and published regulations — verify against your supplier's SDS before use.
GHS Ecosystem: GHS Symbols → Hazard Classification ▶ You are on GHS Pictograms GHS Labels

Safety data sheet reference · CAS 62-53-3

Aniline SDS

also: aniline MSDS · safety data sheet · CAS 62-53-3 · EC 200-539-3 · aminobenzene · phenylamine

Danger Carc. 2 · Muta. 2 · Category 3 · +4 Aquatic Acute 1 UN 1547 · ADR 6.1 · PG II
Corrosion GHS05 Skull and Crossbones GHS06 Health Hazard GHS08 Environmental Hazard GHS09

Official PDF from supplier

This page is a reference, not the legal document.

CAS number

62-53-3

EC number

200-539-3

CLP Annex VI index

612-008-00-7

Molecular formula

C6H7N

Molar mass

93.13 g/mol

§ 02 · Hazards identification

Harmonised EU classification

CLP Annex VI · Index 612-008-00-7. A supplier SDS may add self-classified hazards — this is the legal minimum.

H301 Toxic if swallowed. Acute toxicity, oral — Category 3 (Acute Tox. 3)
H311 Toxic in contact with skin. Acute toxicity, dermal — Category 3
H317 May cause an allergic skin reaction. Skin sensitiser — Category 1 (Skin Sens. 1)
H318 Causes serious eye damage. Serious eye damage — Category 1 (Eye Dam. 1)
H331 Toxic if inhaled. Acute toxicity, inhalation — Category 3
H341 Suspected of causing genetic defects. Germ cell mutagenicity — Category 2 (Muta. 2)
H351 Suspected of causing cancer. Carcinogenicity — Category 2 (Carc. 2)
H372 Causes damage to organs through prolonged or repeated exposure. STOT repeated exposure — Category 1 (STOT RE 1)
H400 Very toxic to aquatic life. Hazardous to aquatic environment, acute — Category 1 (Aquatic Acute 1)

Precautionary statements

P201 Obtain special instructions before use.
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P270 Do not eat, drink or smoke when using this product.
P271 Use only outdoors or in a well-ventilated area.
P272 Contaminated work clothing should not be allowed out of the workplace.
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301 IF SWALLOWED: call a POISON CENTER or doctor if you feel unwell.
P302 IF ON SKIN: wash with plenty of water.
P304 IF INHALED: remove person to fresh air and keep comfortable for breathing.
P305 IF IN EYES: rinse cautiously with water for several minutes.
P308 IF exposed or concerned: get medical advice/attention.
P310 Immediately call a POISON CENTER or doctor.
P313 Get medical advice/attention.
P314 Get medical advice/attention if you feel unwell.
P330 Rinse mouth.
P333 If skin irritation or rash occurs: get medical advice/attention.
P338 Remove contact lenses, if present and easy to do. Continue rinsing.
P352 Wash with plenty of water.
P391 Collect spillage.
P501 Dispose of contents/container in accordance with local regulations.

§ 07 · Handling and storage

Computed storage verdict

§ 09 · Physical and chemical properties

Measured properties

Fire-relevant values first — flash point and explosion limits decide the storage and ventilation regime.

Flash point

70 °C

Autoignition

615 °C

Melting point -6.1 °C
Relative density (water = 1) 1.022

Source: CAMEO Chemicals (NOAA, public domain); per-value source references stored in the database.

§ 10 · Stability and reactivity

Reactive group (CAMEO/NOAA): Amines, Aromatic. Our database documents 21 incompatible and 12 caution reaction-partner groups for aniline — including which combinations release gas on contact. See the per-partner breakdown with gas release →

21

Incompatible

12

Caution

§ 13 · Disposal considerations

Dispose of waste and residues in accordance with local and national regulations — in the EU under the Waste Framework Directive 2008/98/EC. Never discharge to drains or municipal waste; hand contaminated packaging and unused product to an authorised waste-disposal company. The supplier's SDS section 13 lists the applicable waste codes for the specific product.

§ 14 · Transport information

Road transport — ADR 2025

UN number

UN 1547

Proper shipping name

ANILINE

Class · PG

6.1 · II

Classification code

T1

Transport category

2

ADR labels

6.1

Hazard ID (Kemler) / UN plate

60
1547

Top: hazard identification number (Kemler). Bottom: UN number — as carried on the orange plate of the transport unit.

Source: UN ADR 2025 (ECE/TRANS/352), Table A. Road (ADR) only — for sea (IMDG) and air (IATA), consult the supplier's SDS §14.

MSDS vs SDS

MSDS vs SDS: is there a difference?

MSDS (Material Safety Data Sheet) is the older name for the same document. In the US, OSHA's Hazard Communication Standard (2012) adopted the GHS-standardised 16-section Safety Data Sheet; in the EU the format is set by REACH Annex II. So a "aniline MSDS" and a "aniline SDS" refer to the same document — today it is issued as an SDS. Full breakdown of the differences →

Other acute toxics in our database

Compliance hub

From classification to SDS

The classification above corresponds to Section 2 of a Safety Data Sheet. Learn how a compliant 16-section SDS is structured and authored →

GHS label maker

Build the label for aniline

Pictograms, signal word and H-statements combined into a compliant label layout →

§ 16 · Sources

Reference aid only. This page summarises the harmonised EU classification and computed storage guidance — it is not a Safety Data Sheet and does not replace one. Always verify hazards, handling and storage against the supplier's SDS (sections 7 and 10) and local regulations before use. Page updated 2026-07-27.

Frequently asked questions

Is an MSDS the same as an SDS?

In practice, yes. MSDS (Material Safety Data Sheet) is the older name for the same document. In the US, OSHA's Hazard Communication Standard (2012) adopted the GHS-standardised 16-section Safety Data Sheet; in the EU the SDS format is set by REACH Annex II. A document you find labelled "aniline MSDS" is today issued as an SDS.

What GHS pictograms does aniline require?

Under the harmonised EU classification (CLP Annex VI), aniline carries GHS05 and GHS06 and GHS08 and GHS09 with the signal word "Danger". Hazard statements: H351, H341, H331, H311, H301, H372, H318, H317, H400. A supplier's SDS may add self-classified hazards on top of this harmonised minimum.

Where can I download an official aniline SDS PDF?

From your own supplier — an SDS is issued per product and supplier, so the correct PDF for an inspection is the one matching the product you actually purchased. The supplier links on this page lead to the official SDS libraries of major distributors.

Get the free GHS / CLP / OSHA deadline calendar

Verified 2026–2029 compliance dates in one PDF — plus alerts when the rules change.