Provenance

Reference data from EU CLP Annex VI and published regulations — verify against your supplier's SDS before use.

Build a label

Substance profile

Diphenylguanidine

Diphenylguanidine is monoclinic needles (crystalized from alcohol and toluene) with a slight odor.

CAS 102-06-7 C13H13N3 211.26 g/mol Warning

01 · Identification

What Diphenylguanidine is

Diphenylguanidine is monoclinic needles (crystalized from alcohol and toluene) with a slight odor. Its molecular formula is C13H13N3 and its molecular weight is 211.26 g/mol. It boils at 170 °C, melts at 150 °C.

Under the GHS it carries the signal word Warning.

CAS number102-06-7
EC number203-002-1
Index number612-149-00-4
Molecular formulaC13H13N3
Molecular weight211.26 g/mol

Other names for Diphenylguanidine

  • 1,3-diphenylguanidine

02 · GHS classification

Hazards and label elements

Harmonised classification under CLP Annex VI. This is the legally binding classification in the EU; other jurisdictions may differ.

Signal wordWarning
Hazard statements assigned to Diphenylguanidine
CodeHazard statement
H361f Suspected of damaging fertility.
H302 Harmful if swallowed.
H335 May cause respiratory irritation.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.

Precautionary statements: P264, P270, P273, P280, P301, P302, P305, P312, P313, P330, P332, P337, P338, P352, P391, P501

03 · Physical and chemical properties

Diphenylguanidine properties

Every value is shown with the conditions it was measured under and the source it came from. Where sources disagree, all values are listed rather than one being picked — the difference is usually a different form of the substance, not an error.

Property Value Conditions Source
Boiling point 170 °C (338 °F) above this value CAMEO
170 °C (338 °F) decomposes, decomposes HSDB
Melting point 150 °C (302 °F) HSDB
Density 1.19 g/cm³ ICSC
1.13 g/cm³ at 20 °C HSDB
Solubility Soluble in ethanol, carbon tetrachloride, chloroform, toluene; very soluble in ethyl ether. HSDB
less than 1 mg/mL at 70 °F (NTP, 1992) at 21.11 °C CAMEO
In water, 1,000 mg/L at 25 °C at 25 °C HSDB
Vapor pressure 1.2751 mmHg at 20 °C ICSC
0.000004 mmHg at 25 °C HSDB
0.00000845 mmHg Haz-Map
Flash point 197.78 °C (388 °F) CAMEO
170 °C (338 °F) ICSC

Values compiled from PubChem Laboratory Chemical Safety Summary. Temperatures converted to Fahrenheit for reference.

04 · Handling and storage

Storing and handling Diphenylguanidine

Reactivity

1,3-DIPHENYLGUANIDINE behaves as an amine. Amines are chemical bases. They neutralize acids to form salts plus water. These acid-base reactions are exothermic. The amount of heat that is evolved per mole of amine in a neutralization is largely independent of the strength of the amine as a base. Amines may be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. Flammable gaseous hydrogen is generated by amines in combination with strong reducing agents, such as hydrides. This chemical is incompatible with strong oxidizers. (NTP, 1992)

Source: CAMEO Chemicals

Planning storage for a mix of chemicals? Check Diphenylguanidine in the storage compatibility matrix →

Get the free GHS / CLP / OSHA deadline calendar

Verified 2026–2029 compliance dates in one PDF — plus alerts when the rules change.