Provenance

Reference data from EU CLP Annex VI and published regulations — verify against your supplier's SDS before use.

Build a label

Transport reference

UN 2672 — Ammonia solution, relative density between 0.880 and 0.957 at 15 °C in water, with more than 10 % but not more than 35 % ammonia

Table A of ADR 2025 and the 49 CFR 172.101 Hazardous Materials Table for this number, kept side by side and never merged, plus the CLP label elements of the substances that ship under it.

ADR class 8 49 CFR 8 PG III Hazard ID 80 2 linked substances
ADR orange-coloured plate: hazard identification number 80 above UN 2672 80 2672

The two tables are never merged. The same UN number can carry a different packing group, a different proper shipping name and entirely different special provisions in each system. Every value below sits under the name of the jurisdiction it comes from.

01 · Two jurisdictions

UN 2672 in ADR 2025 and in 49 CFR 172.101

The two systems differ for this number on 1 of 5 fields. Special provisions are deliberately absent from this comparison: identical code numbers mean different things in the two systems.

Field ADR 2025 Table A, Chapter 3.2 49 CFR 172.101 eCFR 2026-08-03
Proper shipping name AMMONIA SOLUTION, relative density between 0.880 and 0.957 at 15 °C in water, with more than 10 % but not more than 35 % ammonia Ammonia solution, relative density between 0.880 and 0.957 at 15 degrees C in water, with more than 10 percent but not more than 35 percent ammonia
Class or division 8 8
Packing group III III
Label codes 8 8
Rows in the table 1 1

Sources: ADR 2025, Table A of Chapter 3.2 · ECE/TRANS/352 Vol. I (UNECE) · 49 CFR 172.101 Hazardous Materials Table · eCFR, revision 2026-08-03

02 · ADR 2025

UN 2672 in Table A of ADR 2025

One row in Table A of Chapter 3.2. Every value below comes from that row.

Proper shipping name (3.1.2) Class Classification code PG Labels Transport category Hazard ID
AMMONIA SOLUTION, relative density between 0.880 and 0.957 at 15 °C in water, with more than 10 % but not more than 35 % ammonia 8 C5 III 8 3 80

Source: ADR 2025, Table A of Chapter 3.2 · ECE/TRANS/352 Vol. I (UNECE). Class 8 is “Corrosive substances” (ADR 2.1.1.1).

Transport category and the 1 000-point exemption

Column (15) of Table A decides whether a load stays under the exemption of ADR 1.1.3.6. Quantities of different categories are added with the multipliers below, and the sum must not exceed 1 000.

Category Max total quantity per transport unit Multiplier in 1.1.3.6.4 What it means
3 1 000 × 1 Packing group III and the listed classes.

Source: ADR 2025, 1.1.3.6.3 and 1.1.3.6.4 · ECE/TRANS/352 Vol. I (UNECE).

Not imported and therefore not shown for this number: limited quantities (column 7a), excepted quantities (7b), packing instructions (8), tank codes (10–13) and the tunnel restriction code (15). An empty section is more honest than borrowed text.

UN 2672 in the 49 CFR 172.101 Hazardous Materials Table

One row in the Hazardous Materials Table.

Symbols (1) Proper shipping name (2) Class (3) PG (5) Labels (6) Packaging (8) Quantity limits (9) Vessel stowage (10)
Ammonia solution, relative density between 0.880 and 0.957 at 15 degrees C in water, with more than 10 percent but not more than 35 percent ammonia 8 III 8 §173.154 · §173.203 · §173.241 5 L passenger
60 L cargo
A · 40, 52, 85

Source: 49 CFR 172.101 Hazardous Materials Table · eCFR, revision 2026-08-03. Class 8 is “Corrosive material” (49 CFR 173.2). Packaging cells are section references into 49 CFR part 173: exceptions, non-bulk, bulk. Handling codes in column 10B are defined in 49 CFR 176.84, which is not part of our import — the numbers are shown as printed in the table.

Vessel stowage categories on this entry

A May be stowed “on deck” or “under deck” on a cargo vessel or on a passenger vessel.

Source: 49 CFR 172.101(k) · eCFR, revision 2026-08-03

Special provisions — 49 CFR 172.102

Codes from column (7) of the Hazardous Materials Table, with the text of § 172.102. These are United States provisions only and have nothing to do with the ADR codes above, even where the number is identical.

336 The use of UN1H1 drums, UN3H1 jerricans, and UN6HA1 composite packagings which meet the requirements of part 178 of the HMR at the Packing Group I or II performance level. These packagings are not required to: (1.) meet the venting requirements in § 173.24(g) or (2.) be marked with the hydrostatic pressure test marking specified in § 173.24a(b)(4). Shipment of packages under this special provision must be made by private or contract motor carrier. Transportation of these packages also requires the door of each van trailer to be marked with “Warning trailer may contain chemical vapor. Do not enter until vapors have dissipated.” The driver of the transport vehicle and the consignee(s) must be trained not to enter the transport vehicle until the ammonia vapors have dissipated, and the emergency response information on the shipping paper must indicate that the vehicle contains ammonia vapors. This training must be documented in training records required by § 172.704(d). Transport vehicles must be vented to prevent accumulation of vapors at a poisonous or flammable concentration.
IB3 Authorized IBCs: Metal (31A, 31B and 31N); Rigid plastics (31H1 and 31H2); Composite (31HZ1 and 31HA2, 31HB2, 31HN2, 31HD2 and 31HH2).
IP8 Ammonia solutions may be transported in rigid or composite plastic IBCs (31H1, 31H2 and 31HZ1) that have successfully passed, without leakage or permanent deformation, the hydrostatic test specified in § 178.814 of this subchapter at a test pressure that is not less than 1.5 times the vapor pressure of the contents at 55 °C (131 °F).
T7 Portable tank instruction. Minimum test pressure: 4 bar; minimum shell thickness (reference steel): § 178.274(d)(2); pressure-relief requirements: Normal; bottom opening requirements: § 178.275(d)(3). See 49 CFR 172.102(c)(7)(ii), Table of Portable Tank T Codes T1-T22.
TP2 a. The maximum degree of filling must not exceed the degree of filling determined by the following:

Source: 49 CFR 172.102 special provisions · eCFR, revision 2026-08-03

04 · Orange plate

The orange-coloured plate for UN 2672

The upper half of the plate carries the hazard identification number, the lower half the UN number. Dimensions follow ADR 5.3.2.2.1: 400 × 300 mm, black border and dividing line 15 mm, figures 100 mm high.

ADR orange-coloured plate: hazard identification number 80 above UN 2672 80 2672

80 — corrosive or slightly corrosive substance.

8 Corrosivity
0 No further hazard — the first figure alone describes the hazard adequately

Source: ADR 2025, 5.3.2.3 · ECE/TRANS/352 Vol. II (UNECE). The tunnel restriction code of column (15) is a different value and is not part of our import.

05 · Substances

Substances shipped under UN 2672

Linked by CAS number, never by name: a name match once produced “acetone cyanohydrin” for acetone, and a wrong link here would be a wrong classification. Each entry opens its own reference page with the CLP classification and label elements.

Full 16-section safety data sheets: Ammonia · Ammonium hydroxide

06 · The label side

What UN 2672 looks like on a workplace label

The tables above are the transport classification. This is the other half of the same material: the CLP label elements of the substances linked to this number — what actually goes on the drum once it has been delivered. Transport marks and supply labels answer different regulations and do not replace one another.

Signal word across the linked substances: Danger

Hazard statements on the substances under UN 2672

H221 Flammable gas.
H314 Causes severe skin burns and eye damage.
H331 Toxic if inhaled.
H400 Very toxic to aquatic life.

Source: harmonised classification, EU CLP Annex VI. Transport classification and supply classification are decided under different rules and do not have to agree.

UN 2672 — frequently asked questions

What is UN 2672?

UN 2672 is the United Nations number for Ammonia solution, relative density between 0.880 and 0.957 at 15 °C in water, with more than 10 % but not more than 35 % ammonia. Under ADR 2025 it is assigned to class 8 (corrosive substances), classification code C5.

What packing group is UN 2672?

Under ADR 2025 UN 2672 is packing group III.

Is UN 2672 classified the same way in the United States and in Europe?

No. For UN 2672 the two tables differ on proper shipping name. Each panel on this page shows its own source; values from one system must not be carried over into the other.

What is the hazard identification number for UN 2672?

The orange-coloured plate for UN 2672 carries the hazard identification number 80 above the UN number. Under ADR 5.3.2.3.2 that number means: corrosive or slightly corrosive substance.

What is the transport category of UN 2672?

Column (15) of Table A puts UN 2672 in transport category 3. Under ADR 1.1.3.6.3 the maximum total quantity per transport unit for that category is 1 000.

Which substances ship under UN 2672?

We hold 2 substances linked to UN 2672 by CAS number, 2 of which also has a full safety data sheet on this site. Each one has its own reference page with the CLP classification, GHS pictograms and hazard statements that apply on the label — the workplace side of the same material.

Need the plate, the labels or the placards printed?

The orange plate above is a physical article, and so are the class labels in column (5). Our sister site GHSLabels.com covers printing and suppliers. For the workplace label of the same material, use the GHS label constructor, and browse other numbers in the UN number reference.

Reference aid only. Values are reproduced from ADR 2025 and the 49 CFR 172.101 table as published; the consignor remains responsible for the classification of a specific consignment. Always verify against the current published regulation and the supplier's safety data sheet.

Get the free GHS / CLP / OSHA deadline calendar

Verified 2026–2029 compliance dates in one PDF — plus alerts when the rules change.