Provenance

Reference data from EU CLP Annex VI and published regulations — verify against your supplier's SDS before use.

Build a label

Substance profile

Molinate

Molinate is a clear liquid with an aromatic odor.

CAS 2212-67-1 C9H17NOS 187.3 g/mol Warning

01 · Identification

What Molinate is

Molinate is a clear liquid with an aromatic odor. Its molecular formula is C9H17NOS and its molecular weight is 187.3 g/mol.

Under the GHS it carries the signal word Warning.

CAS number2212-67-1
EC number218-661-0
Index number613-051-00-4
Molecular formulaC9H17NOS
Molecular weight187.3 g/mol

Other names for Molinate

  • molinate (ISO)
  • S-ethyl 1-perhydroazepinecarbothioate
  • S-ethyl perhydroazepine-1-carbothioate

02 · GHS classification

Hazards and label elements

Harmonised classification under CLP Annex VI. This is the legally binding classification in the EU; other jurisdictions may differ.

Signal wordWarning
Hazard statements assigned to Molinate
CodeHazard statement
H351 Suspected of causing cancer <state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard>.
H361f Suspected of damaging fertility.
H332 Harmful if inhaled.
H302 Harmful if swallowed.
H373 May cause damage to organs <or state all organs affected, if known> through prolonged or repeated exposure <state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard>.
H317 May cause an allergic skin reaction.
H400 Very toxic to aquatic life.
H410 Very toxic to aquatic life with long lasting effects.

Precautionary statements: P201, P260, P261, P270, P271, P272, P273, P280, P301, P304, P308, P312, P313, P314, P330, P333, P391, P501

03 · Physical and chemical properties

Molinate properties

Every value is shown with the conditions it was measured under and the source it came from. Where sources disagree, all values are listed rather than one being picked — the difference is usually a different form of the substance, not an error.

Property Value Conditions Source
Boiling point 136.5 °C (277.7 °F) at 10 mmHg (reduced pressure) HSDB
Density 1.063 g/cm³ at 20 °C HSDB
Solubility Miscible with acetone, ethanol, kerosene, 4-methylpentan-2-one, xylene HSDB
In water, 970 mg/l @ 25 °C at 25 °C HSDB
Vapor pressure 0.0056 mmHg at 25 °C HSDB
0.0056 mmHg Haz-Map
Flash point 139 °C (282.2 °F) HSDB
Corrosivity Noncorrosive HSDB

Values compiled from PubChem Laboratory Chemical Safety Summary. Temperatures converted to Fahrenheit for reference.

04 · Handling and storage

Storing and handling Molinate

Storage conditions

Store away from food and feedstuffs and out of reach of children.

Source: Hazardous Substances Data Bank (HSDB)

Reactivity

MOLINATE is a thiocarbamate. Flammable gases are generated by the combination of thiocarbamates and dithiocarbamates with aldehydes, nitrides, and hydrides. Thiocarbamates and dithiocarbamates are incompatible with acids, peroxides, and acid halides.

Source: CAMEO Chemicals

Planning storage for a mix of chemicals? Check Molinate in the storage compatibility matrix →

Get the free GHS / CLP / OSHA deadline calendar

Verified 2026–2029 compliance dates in one PDF — plus alerts when the rules change.