Provenance

Reference data from EU CLP Annex VI and published regulations — verify against your supplier's SDS before use.

Build a label

Substance profile

Fluazinam

Fluazinam is light yellow crystals with a pungent at 23 °C odor.

CAS 79622-59-6 C13H4Cl2F6N4O4 465.09 g/mol Danger

01 · Identification

What Fluazinam is

Fluazinam is light yellow crystals with a pungent at 23 °C odor. Its molecular formula is C13H4Cl2F6N4O4 and its molecular weight is 465.09 g/mol. It melts at 116 °C.

Under the GHS it carries the signal word Danger.

CAS number79622-59-6
Index number612-287-00-5
Molecular formulaC13H4Cl2F6N4O4
Molecular weight465.09 g/mol

Other names for Fluazinam

  • fluazinam (ISO)
  • 3-chloro-N-[3-chloro-2,6-dinitro-4-(trifluoromethyl)phenyl]-5-(trifluoromethyl)pyridin-2-amine

02 · GHS classification

Hazards and label elements

Harmonised classification under CLP Annex VI. This is the legally binding classification in the EU; other jurisdictions may differ.

Signal wordDanger
Hazard statements assigned to Fluazinam
CodeHazard statement
H361d Suspected of damaging the unborn child.
H332 Harmful if inhaled.
H318 Causes serious eye damage.
H317 May cause an allergic skin reaction.
H400 Very toxic to aquatic life.
H410 Very toxic to aquatic life with long lasting effects.

Precautionary statements: P260, P261, P271, P272, P273, P280, P304, P305, P310, P312, P313, P333, P338, P391, P501

03 · Physical and chemical properties

Fluazinam properties

Every value is shown with the conditions it was measured under and the source it came from. Where sources disagree, all values are listed rather than one being picked — the difference is usually a different form of the substance, not an error.

Property Value Conditions Source
Melting point 116 °C (240.8 °F) range, midpoint shown HSDB
Density 1.259 g/cm³ at 25 °C HSDB
Solubility Solubility in methanol 162 g/L, dichloroethane 485 g/L, ethyl acetate 624 g/L HSDB
Solubility in n-hexane 12, acetone 470, toluene 410, diethyl ether 320, dichloromethane 330, ethanol 150 (all in g/L, 20 °C) at 20 °C HSDB
In water, 1.35X10-1 mg/L at 20 °C at 20 °C HSDB
Vapor pressure 0.000056 mmHg at 25 °C HSDB
0.000056 mmHg Haz-Map

Values compiled from PubChem Laboratory Chemical Safety Summary. Temperatures converted to Fahrenheit for reference.

04 · Source notes

Further notes on Fluazinam

These are descriptions rather than measured values, so they are kept out of the table above and quoted here with the source that reported them.

Corrosivity

No visible changes in commercial packaging (polyethylene jugs) following storage at 50 °C for 91 days. No physical changes in plastic containers after 12 months at 25 °C.

Source: HSDB

Get the free GHS / CLP / OSHA deadline calendar

Verified 2026–2029 compliance dates in one PDF — plus alerts when the rules change.