Substance profile
Di-allate
Di-allate is a brown liquid.
01 · Identification
What Di-allate is
Di-allate is a brown liquid. Its molecular formula is C10H17Cl2NOS and its molecular weight is 270.22 g/mol. It melts at 27.5 °C.
Under the GHS it carries the signal word Warning.
Other names for Di-allate
- di-allate (ISO)
- S-(2,3-dichloroallyl)-N,N-diisopropylthiocarbamate
02 · GHS classification
Hazards and label elements
Harmonised classification under CLP Annex VI. This is the legally binding classification in the EU; other jurisdictions may differ.
| Code | Hazard statement |
|---|---|
| H351 | Suspected of causing cancer <state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard>. |
| H302 | Harmful if swallowed. |
| H400 | Very toxic to aquatic life. |
| H410 | Very toxic to aquatic life with long lasting effects. |
Precautionary statements: P201, P270, P273, P280, P301, P308, P312, P313, P330, P391, P501
03 · Physical and chemical properties
Di-allate properties
Every value is shown with the conditions it was measured under and the source it came from. Where sources disagree, all values are listed rather than one being picked — the difference is usually a different form of the substance, not an error.
| Property | Value | Conditions | Source |
|---|---|---|---|
| Boiling point | 150 °C (302 °F) | at 9 mmHg (reduced pressure) | HSDB |
| Melting point | 27.5 °C (81.5 °F) | range, midpoint shown | HSDB |
| Density | 1.188 g/cm³ | at 25 °C | HSDB |
| Solubility | SOL IN ACETONE, BENZENE, CHLOROFORM, ETHER, & HEPTANE | HSDB | |
| SOL IN WATER 14 PPM @ 25 °C | at 25 °C | HSDB | |
| MISCIBLE WITH ETHANOL & ISOPROPYL ALCOHOL. MISCIBLE IN XYLENE, KEROSENE, & ETHYL ACETATE @ 25 °C. | at 25 °C | HSDB | |
| Vapor pressure | 0.00015 mmHg | at 25 °C | HSDB |
| 0.00015 mmHg | Haz-Map | ||
| Flash point | 77 °C (170.6 °F) | closed cup | HSDB |
| 77 °C (170.6 °F) | Haz-Map | ||
| Corrosivity | NONCORROSIVE | HSDB |
Values compiled from PubChem Laboratory Chemical Safety Summary. Temperatures converted to Fahrenheit for reference.
04 · Handling and storage
Storing and handling Di-allate
Storage conditions
Rooms used for storage only should be soundly constructed and fitted with secure locks. Floors should be kept clear and the pesticides clearly identified. /Pesticides/
Source: Hazardous Substances Data Bank (HSDB)
Reactivity
DIALLATE is a thiocarbamate ester. Flammable gases are generated by the combination of thiocarbamates and dithiocarbamates with aldehydes, nitrides, and hydrides. Thiocarbamates and dithiocarbamates are incompatible with acids, peroxides, and acid halides.
Source: CAMEO Chemicals
Planning storage for a mix of chemicals? Check Di-allate in the storage compatibility matrix →