Provenance

Reference data from EU CLP Annex VI and published regulations — verify against your supplier's SDS before use.

Build a label

Substance profile

2-(2-aminoethylamino)ethanol

2-(2-aminoethylamino)ethanol is a colorless liq with a mild ammoniacal odor.

CAS 111-41-1 C4H12N2O 104.15 g/mol Danger

01 · Identification

What 2-(2-aminoethylamino)ethanol is

2-(2-aminoethylamino)ethanol is a colorless liq with a mild ammoniacal odor. Its molecular formula is C4H12N2O and its molecular weight is 104.15 g/mol. It boils at 244 °C, melts at -33 °C.

Under the GHS it carries the signal word Danger. It is classed as corrosives.

CAS number111-41-1
EC number203-867-5
Index number603-194-00-0
Molecular formulaC4H12N2O
Molecular weight104.15 g/mol
Chemical class Corrosives

Other names for 2-(2-aminoethylamino)ethanol

  • (AEEA)

02 · GHS classification

Hazards and label elements

Harmonised classification under CLP Annex VI. This is the legally binding classification in the EU; other jurisdictions may differ.

Signal wordDanger
Hazard statements assigned to 2-(2-aminoethylamino)ethanol
CodeHazard statement
H360Df May damage the unborn child. Suspected of damaging fertility.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.

Precautionary statements: P260, P261, P272, P280, P301, P310, P313, P331, P333

03 · Physical and chemical properties

2-(2-aminoethylamino)ethanol properties

Every value is shown with the conditions it was measured under and the source it came from. Where sources disagree, all values are listed rather than one being picked — the difference is usually a different form of the substance, not an error.

Property Value Conditions Source
Boiling point 243.7 °C (470.7 °F) HSDB
243 °C (469.4 °F) at 760 mmHg DOE PAC
139 °C (282.2 °F) range, midpoint shown HSDB
Melting point -33 °C (-27.4 °F) DOE PAC
Density 1.028 g/cm³ OSHA
1.0254 g/cm³ at 25 °C HSDB
1.028 g/cm³ at 25 °C CAMEO
Solubility VERY SOL IN WATER, ALCOHOL, ACETATE HSDB
greater than or equal to 100 mg/mL at 70 °F (NTP, 1992) at 21.11 °C CAMEO
Vapor pressure 0.01 mmHg at 20 °C DOE PAC
0.000819 mmHg at 25 °C HSDB
0.01 mmHg below this value, at 20 °C CAMEO
Flash point 132 °C (269.6 °F) CLOSED CUP HSDB
102.22 °C (216 °F) CAMEO
Autoignition temperature 368.33 °C (695 °F) HSDB
Lower explosive limit (LEL) 1 % by volume calc. CAMEO
1 % by volume OSHA
Upper explosive limit (UEL) 8 % by volume calc. CAMEO
8 % by volume OSHA
Vapor density 3.59 (air = 1) HSDB

Values compiled from PubChem Laboratory Chemical Safety Summary. Temperatures converted to Fahrenheit for reference.

04 · Handling and storage

Storing and handling 2-(2-aminoethylamino)ethanol

Reactivity

AMINOETHYLETHANOLAMINE is an amine and alcohol. Amines are chemical bases. They neutralize acids to form salts plus water. These acid-base reactions are exothermic. The amount of heat that is evolved per mole of amine in a neutralization is largely independent of the strength of the amine as a base. Amines may be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. Flammable gaseous hydrogen is generated by amines in combination with strong reducing agents, such as hydrides. This chemical is hygroscopic.

Source: CAMEO Chemicals

Planning storage for a mix of chemicals? Check 2-(2-aminoethylamino)etha… in the storage compatibility matrix →

Get the free GHS / CLP / OSHA deadline calendar

Verified 2026–2029 compliance dates in one PDF — plus alerts when the rules change.