Provenance

Reference data from EU CLP Annex VI and published regulations — verify against your supplier's SDS before use.

Build a label

Substance profile

N,N,N',N'-tetramethyl-p-phenylenediamine

N,N,N',N'-tetramethyl-p-phenylenediamine: leaflets or a drab green solid.

CAS 100-22-1 C10H16N2 164.25 g/mol Warning

01 · Identification

What N,N,N',N'-tetramethyl-p-phenyl… is

N,N,N',N'-tetramethyl-p-phenylenediamine: leaflets or a drab green solid. Its molecular formula is C10H16N2 and its molecular weight is 164.25 g/mol. It boils at 260 °C, melts at 50 °C.

Under the GHS it carries the signal word Warning.

CAS number100-22-1
EC number202-831-6
Index number612-032-00-8
Molecular formulaC10H16N2
Molecular weight164.25 g/mol

02 · GHS classification

Hazards and label elements

Harmonised classification under CLP Annex VI. This is the legally binding classification in the EU; other jurisdictions may differ.

Signal wordWarning
Hazard statements assigned to N,N,N',N'-tetramethyl-p-phenyl…
CodeHazard statement
H332 Harmful if inhaled.
H312 Harmful in contact with skin.
H302 Harmful if swallowed.

Precautionary statements: P260, P270, P271, P280, P301, P302, P304, P312, P330, P352

03 · Physical and chemical properties

N,N,N',N'-tetramethyl-p-phenyl… properties

Every value is shown with the conditions it was measured under and the source it came from. Where sources disagree, all values are listed rather than one being picked — the difference is usually a different form of the substance, not an error.

Property Value Conditions Source
Boiling point 260 °C (500 °F) at 760 mmHg CAMEO
Melting point 50 °C (122 °F) range, midpoint shown CAMEO
Solubility less than 1 mg/mL at 70 °F (NTP, 1992) at 21.11 °C CAMEO
Vapor pressure 0.07 mmHg Haz-Map
Flash point 112.78 °C (235 °F) above this value CAMEO

Values compiled from PubChem Laboratory Chemical Safety Summary. Temperatures converted to Fahrenheit for reference.

04 · Handling and storage

Storing and handling N,N,N',N'-tetramethyl-p-phenyl…

Reactivity

N,N,N',N'-TETRAMETHYL-P-PHENYLENEDIAMINE can burn in air to give toxic NOx gases (NTP, 1992). Neutralizes acids in exothermic reactions to form salts plus water. May be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. Flammable gaseous hydrogen may be generated in combination with strong reducing agents, such as hydrides.

Source: CAMEO Chemicals

Planning storage for a mix of chemicals? Check N,N,N',N'-tetramethyl-p-p… in the storage compatibility matrix →

Get the free GHS / CLP / OSHA deadline calendar

Verified 2026–2029 compliance dates in one PDF — plus alerts when the rules change.