Provenance

Reference data from EU CLP Annex VI and published regulations — verify against your supplier's SDS before use.

Build a label

Substance profile

Ethoxyquin

Ethoxyquin is a yellow liquid.

CAS 91-53-2 C14H19NO 217.31 g/mol Warning

01 · Identification

What Ethoxyquin is

Ethoxyquin is a yellow liquid. Its molecular formula is C14H19NO and its molecular weight is 217.31 g/mol. It melts at 0 °C.

Under the GHS it carries the signal word Warning.

CAS number91-53-2
EC number202-075-7
Index number613-014-00-2
Molecular formulaC14H19NO
Molecular weight217.31 g/mol

Other names for Ethoxyquin

  • ethoxyquin (ISO)
  • 6-ethoxy-1,2-dihydro-2,2,4-trimethylquinoline

02 · GHS classification

Hazards and label elements

Harmonised classification under CLP Annex VI. This is the legally binding classification in the EU; other jurisdictions may differ.

Signal wordWarning
Hazard statements assigned to Ethoxyquin
CodeHazard statement
H302 Harmful if swallowed.

Precautionary statements: P270, P301, P312, P330

03 · Physical and chemical properties

Ethoxyquin properties

Every value is shown with the conditions it was measured under and the source it came from. Where sources disagree, all values are listed rather than one being picked — the difference is usually a different form of the substance, not an error.

Property Value Conditions Source
Boiling point 124 °C (255.2 °F) range, midpoint shown, at 2 mmHg (reduced pressure) HSDB
123.89 °C (255 °F) range, midpoint shown, at 2 mmHg (reduced pressure) CAMEO
Melting point 0 °C (32 °F) approximate HSDB
0 °C (32 °F) below this value CAMEO
Density 1.03 g/cm³ range, midpoint shown, at 25 °C HSDB
Solubility less than 1 mg/mL at 68 °F (NTP, 1992) at 20 °C CAMEO
Vapor pressure 0.0000182 mmHg at 0 °C CAMEO
0.000132 mmHg Haz-Map
Flash point 107.22 °C (225 °F) CAMEO
Vapor density 7.48 (air = 1) HSDB

Values compiled from PubChem Laboratory Chemical Safety Summary. Temperatures converted to Fahrenheit for reference.

04 · Handling and storage

Storing and handling Ethoxyquin

Incompatible materials

Can react with oxidizing materials.

Source: Hazardous Substances Data Bank (HSDB)

Reactivity

ETHOXYQUIN may undergo a hazardous polymerization at temperatures above 320 °F. Tends to polymerize and darken in color on exposure to light and air. Not compatible with oxidizing agents and with strong acids (NTP, 1992).

Source: CAMEO Chemicals

Planning storage for a mix of chemicals? Check Ethoxyquin in the storage compatibility matrix →

Get the free GHS / CLP / OSHA deadline calendar

Verified 2026–2029 compliance dates in one PDF — plus alerts when the rules change.