Provenance

Reference data from EU CLP Annex VI and published regulations — verify against your supplier's SDS before use.

Build a label

Substance profile

Allidochlor

Allidochlor is oily amber liquid or granules.

CAS 93-71-0 C8H12ClNO 173.64 g/mol Warning

01 · Identification

What Allidochlor is

Allidochlor is oily amber liquid or granules. Its molecular formula is C8H12ClNO and its molecular weight is 173.64 g/mol. It melts at 145 °C, is soluble in water.

Under the GHS it carries the signal word Warning.

CAS number93-71-0
EC number202-270-7
Index number616-004-00-6
Molecular formulaC8H12ClNO
Molecular weight173.64 g/mol

Other names for Allidochlor

  • allidochlor (ISO)
  • N,N-diallylchloroacetamide

02 · GHS classification

Hazards and label elements

Harmonised classification under CLP Annex VI. This is the legally binding classification in the EU; other jurisdictions may differ.

Signal wordWarning
Hazard statements assigned to Allidochlor
CodeHazard statement
H312 Harmful in contact with skin.
H302 Harmful if swallowed.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.

Precautionary statements: P264, P270, P273, P280, P301, P302, P305, P312, P313, P330, P332, P337, P338, P352, P391, P501

03 · Physical and chemical properties

Allidochlor properties

Every value is shown with the conditions it was measured under and the source it came from. Where sources disagree, all values are listed rather than one being picked — the difference is usually a different form of the substance, not an error.

Property Value Conditions Source
Boiling point 92 °C (197.6 °F) at 2 mmHg (reduced pressure) HSDB
73.89 °C (165 °F) at 0.3 mmHg (reduced pressure) CAMEO
Melting point 145 °C (293 °F) HSDB
125 °C (257 °F) HSDB
Density 1.088 g/cm³ at 25 °C HSDB
Solubility Soluble in alcohol, hexane and xylene HSDB
Soluble in ethanol HSDB
FAIRLY SOL IN PETROLEUM ETHER, TRICHLOROMETHANE HSDB
Vapor pressure 0.0094 mmHg at 20 °C HSDB
0.0094 mmHg Haz-Map
Flash point 15 °C (59 °F) HSDB
Corrosivity CORROSIVE TO ORDINARY STEEL HSDB

Values compiled from PubChem Laboratory Chemical Safety Summary. Temperatures converted to Fahrenheit for reference.

04 · Handling and storage

Storing and handling Allidochlor

Incompatible materials

...ON CONTACT WITH ACIDS OR ACID FUMES, THEY EVOLVE HIGHLY TOXIC CHLORIDE FUMES. /CHLORIDES/

Source: Hazardous Substances Data Bank (HSDB)

Reactivity

Corrosive to steel. (NTP, 1992).

Source: CAMEO Chemicals

Planning storage for a mix of chemicals? Check Allidochlor in the storage compatibility matrix →

Get the free GHS / CLP / OSHA deadline calendar

Verified 2026–2029 compliance dates in one PDF — plus alerts when the rules change.