Substance profile
3-aminopropyldimethylamine
3-aminopropyldimethylamine is a colorless liquid with an ammoniacal odor.
01 · Identification
What 3-aminopropyldimethylamine is
3-aminopropyldimethylamine is a colorless liquid with an ammoniacal odor. Its molecular formula is C5H14N2 and its molecular weight is 102.18 g/mol. It boils at 123 °C, melts at -70 °C.
Under the GHS it carries the signal word Danger. It is classed as flammable agents - 3rd degree.
Other names for 3-aminopropyldimethylamine
- N,N-dimethyl-1,3-diaminopropane
02 · GHS classification
Hazards and label elements
Harmonised classification under CLP Annex VI. This is the legally binding classification in the EU; other jurisdictions may differ.
| Code | Hazard statement |
|---|---|
| H226 | Flammable liquid and vapour. |
| H302 | Harmful if swallowed. |
| H314 | Causes severe skin burns and eye damage. |
| H317 | May cause an allergic skin reaction. |
Precautionary statements: P210, P233, P241, P242, P260, P261, P270, P272, P280, P301, P310, P312, P313, P330, P331, P333, P403
This page lists only the codes assigned to 3-aminopropyldimethylamine. The full reference lives on the hazard statements hub, the precautionary statements hub and the GHS pictograms hub.
03 · Physical and chemical properties
3-aminopropyldimethylamine properties
Every value is shown with the conditions it was measured under and the source it came from. Where sources disagree, all values are listed rather than one being picked — the difference is usually a different form of the substance, not an error.
| Property | Value | Conditions | Source |
|---|---|---|---|
| Boiling point | 123 °C (253.4 °F) | HSDB | |
| 122.78 °C (253 °F) | at 760 mmHg | CAMEO | |
| 135 °C (275 °F) | ICSC | ||
| Melting point | -70 °C (-94 °F) | HSDB | |
| -70 °C (-94 °F) | below this value | CAMEO | |
| Density | 0.81 g/cm³ | CAMEO | |
| 0.81 g/cm³ | at 30 °C | HSDB | |
| Solubility | Sol in water and org solvents | HSDB | |
| Soluble in oxygenated solvents | HSDB | ||
| Soluble (NTP, 1992) | CAMEO | ||
| Vapor pressure | 9.9758 mmHg | at 30 °C | ICSC |
| 10 mmHg | at 30 °C | DOE PAC | |
| 9.75 mmHg | Haz-Map | ||
| Flash point | 35 °C (95 °F) | HSDB | |
| 15.56 °C (60 °F) | CAMEO | ||
| Lower explosive limit (LEL) | 2.3 % by volume | ICSC | |
| Upper explosive limit (UEL) | 12.3 % by volume | ICSC | |
| Vapor density | 3.5 (air = 1) | HSDB | |
| Odor threshold | Odor Threshold Low: 0.1 [ppm] | Haz-Map | |
| Odor threshold from CHEMINFO | Haz-Map |
Values compiled from PubChem Laboratory Chemical Safety Summary. Temperatures converted to Fahrenheit for reference.
04 · Handling and storage
Storing and handling 3-aminopropyldimethylamine
Incompatible materials
Ignites on contact with cellulose nitrate of high surface area.
Source: Hazardous Substances Data Bank (HSDB)
Reactivity
DIMETHYLAMINOPROPYLAMINE neutralizes acids in exothermic reactions to form salts plus water. May be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. Flammable gaseous hydrogen may be generated in combination with strong reducing agents, such as hydrides.
Source: CAMEO Chemicals
Planning storage for a mix of chemicals? Check 3-aminopropyldimethylamin… in the storage compatibility matrix →
Safety Data Sheet
Getting an SDS for 3-aminopropyldimethylamine
A Safety Data Sheet is written for a product, not for a substance: the supplier of the grade you actually buy issues it, so two suppliers of 3-aminopropyldimethyla… issue two different sheets. That is why there is no single authoritative SDS for a substance to download — what there is, is the job of collecting the sheets for the products you hold and keeping them current as suppliers revise them.
Nearby
Substances next to 3-aminopropyldimethylamine
Keep going: substances starting with 0–9, or search the whole database by name, CAS number, pictogram or signal word.