Provenance

Reference data from EU CLP Annex VI and published regulations — verify against your supplier's SDS before use.

Build a label

Substance profile

2-(tert-Butylamino)ethyl methacrylate

2-(tert-Butylamino)ethyl methacrylate is a LIQUID.

CAS 3775-90-4 C10H19NO2 185.26 g/mol Warning

01 · Identification

What 2-(tert-Butylamino)ethyl… is

2-(tert-Butylamino)ethyl methacrylate is a LIQUID. Its molecular formula is C10H19NO2 and its molecular weight is 185.26 g/mol. It melts at -70 °C.

Under the GHS it carries the signal word Warning. It is classed as corrosives.

CAS number3775-90-4
EC number223-228-4
Index number607-128-00-1
Molecular formulaC10H19NO2
Molecular weight185.26 g/mol
Chemical class Corrosives

Other names for 2-(tert-Butylamino)ethyl…

  • 2-tert-butylaminoethyl methacrylate

02 · GHS classification

Hazards and label elements

Harmonised classification under CLP Annex VI. This is the legally binding classification in the EU; other jurisdictions may differ.

Signal wordWarning
Hazard statements assigned to 2-(tert-Butylamino)ethyl…
CodeHazard statement
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H317 May cause an allergic skin reaction.

Precautionary statements: P261, P264, P272, P280, P302, P305, P313, P332, P333, P337, P338, P352

03 · Physical and chemical properties

2-(tert-Butylamino)ethyl… properties

Every value is shown with the conditions it was measured under and the source it came from. Where sources disagree, all values are listed rather than one being picked — the difference is usually a different form of the substance, not an error.

Property Value Conditions Source
Boiling point 102.5 °C (216.5 °F) range, midpoint shown, at 12 mmHg (reduced pressure) HSDB
Melting point -70 °C (-94 °F) below this value HSDB
Density 0.914 g/cm³ at 25 °C HSDB
Solubility 1.8 g/100 ml water at 25 °C at 25 °C HSDB
Flash point 96.1 °C (205 °F) Cleveland open cup HSDB
11 °C (51.8 °F) Cleveland open cup HSDB

Values compiled from PubChem Laboratory Chemical Safety Summary. Temperatures converted to Fahrenheit for reference.

04 · Handling and storage

Storing and handling 2-(tert-Butylamino)ethyl…

Storage conditions

... Storage temp for ... /t-butyl-aminoethyl methacrylate/ should not exceed 25 °C in order to avoid the slow build-up of sol oligomers and polymers.

Source: Hazardous Substances Data Bank (HSDB)

Planning storage for a mix of chemicals? Check 2-(tert-Butylamino)ethyl… in the storage compatibility matrix →

Get the free GHS / CLP / OSHA deadline calendar

Verified 2026–2029 compliance dates in one PDF — plus alerts when the rules change.